NPE-300 Cisco 7200 Series Network Processing Engine

Cisco NPE-300 7200 Series Network Processing Engine is a Refurbished (Used), Cisco Original Part. This NPE-300_GFY is in stock and ships the same day. We guarantee this part is compatible with your system.

Features: Refurbished (Used), Cisco Original Part.

Dimensions:N/A

Product Specs: The NPE-300 has two system controllers that provide processor access to the two midplane and single I/O controller PCI buses. The system controller also allows port adapters on either of the two midplane PCI buses to access SDRAM. The NPE-300 uses SDRAM for storing all packets received or sent from network interfaces. The SDRAM also stores routing tables and network accounting applications. Two independent SDRAM memory arrays in the system allow concurrent access by port adapters and the processor. The NPE-300 has a fixed configuration caveat with the first 32MB SIMM. The NPE-300 does not have packet SRAM. The NPE-300 has three levels of cache: a primary and a secondary cache that are internal to the microprocessor, and a tertiary, 2-MB external cache that provides additional high-speed storage for data and instructions.

• Device Type: Control processor
• Processors Installed: 1 x RM7000 262 MHz RISC
• Max Supported Qty: 1
• RAM Installed ( Max ): 64 MB ( 286 MB ) - SDRAM
• Flash Memory Installed (Max): 512 KB ( 512 KB ) - ROM (boot)
• Form Factor: Plug-in module
• Remote Management Protocol: SNMP
• Expansion Slots Total (Free): 3 ( 1 ) x memory
• Compatible Slots: 1 x expansion slot

Weight:

Compatibility: Cisco 7200 series.

Warranty: 90 days for exchange, repair or 14 days return for full credit minus shipping cost with original package unopen.